Euchner TX3C-A024M 082953

• Auxiliary release on the front
• Release under load possible
• With door monitoring contact

Approach direction Horizontal and vertical Can be adjusted in 90° steps Solenoid operating voltage

• AC/DC 24 V +10%, -15%

LED function displayThe switch has a function display (2 LEDs, red and green). The LED voltage is same as the solenoid operating voltage. Guard locking type

TX3	Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the solenoid. Release under load possible.

Switching element

ETX C

Slow-action switching contact 2 NC / 1 NO + 1 NO (door monitoring contact)

Auxiliary releaseIs used for releasing the guard locking with the aid of a tool. The auxiliary release must be sealed to prevent tampering (for example with sealing lacquer).

Housing material	Die-cast alloy, cathodically dipped
Weight
Net	0,8 kg
Ambient temperature	-20 ... 80 °C
Degree of protection	IP67
Mechanical life	1 x 106
Contact material	Silver alloy, gold flashed
Switching principle	Slow-action switching contact
Installation orientation	Any
Number of door position NO contacts	1
Number of guard lock monitoring positively driven contacts	2
Number of guard lock monitoring NO contacts	1
Connection
3 x	M20 x 1.5
Approach speed
max.	20 m/min
Actuation frequency	1200 1/h
Guard locking principle	Closed-circuit current principle
Locking force Fmax	1700 N
Locking force FZh	1300 N
Retention force	min.50 N
Extraction force	35 N
Actuating force	35 N
Insertion depth	min.32 mm

Electrical connection ratings

Thermal rated current Ith	4 A
Utilization category according to EN 60947-5-1
AC-15	4A 230V
DC-13	4A 24V
Solenoid operating voltage
AC/DC	24 V -15% ... +10%
Short circuit protection according to IEC 60269-1
(Fuse)	4A gG
Rated insulation voltage Ui	250 V
Rated impulse withstand voltage Uimp	2,5 kV
Switching voltage
Min. at 10mA	12 V
Switching current
Min. at 24V	1 mA
Power consumption	8 W
Solenoid duty cycle	100 %
Connection cross-section	0,34 ... 1,5 mm?
LED indicator	Operating voltage corresponds to the solenoid voltage

Reliability values according to EN ISO 13849-1

	Control of the guard locking
Category	Depending on external control of guard locking
Performance Level	Depending on external control of guard locking
PFHD	Depending on external control of guard locking
	Monitoring of guard locking and the safety guard position
B10D	6 x 106

In combination with Actuator BETAETIGER-X-GQMechanical values and environment

Overtravel

1 mm

In combination with Actuator BETAETIGER-X-GNQMechanical values and environment

Overtravel

8 mm