Euchner TX2C-A024RC18 082940

• Auxiliary release on the front
• With door monitoring contact
• Plug connector M23 (RC18)

Approach direction Horizontal and vertical Can be adjusted in 90° steps Solenoid operating voltage

• AC/DC 24 V +10%, -15%

LED function displayThe switch has a function display (2 LEDs, red and green). The LED voltage is same as the solenoid operating voltage. Guard locking type

TX2	Open-circuit current principle, guard locking by applying voltage to the solenoid. Release by spring force.

Switching element

ETX C

Slow-action switching contact 2 NC / 1 NO + 1 NO (door monitoring contact)

Auxiliary releaseIs used for releasing the guard locking with the aid of a tool. The auxiliary release must be sealed to prevent tampering (for example with sealing lacquer).

Housing material	Die-cast alloy, cathodically dipped
Weight
Net	0,8 kg
Ambient temperature	-20 ... 80 °C
Degree of protection	IP65
Mechanical life	1 x 106
Contact material	Silver alloy, gold flashed
Switching principle	Slow-action switching contact
Installation orientation	Any
Number of door position NO contacts	1
Number of guard lock monitoring positively driven contacts	2
Number of guard lock monitoring NO contacts	1
Connection
1 x	Plug connector RC18
Approach speed
max.	20 m/min
Actuation frequency	1200 1/h
Guard locking principle	Open-circuit current principle
Locking force Fmax	1700 N
Locking force FZh	1300 N
Retention force	20 N
Extraction force	35 N
Actuating force	35 N
Insertion depth	min.32 mm

Electrical connection ratings

Thermal rated current Ith	4 A 70°C => 2A'>
Utilization category according to EN 60947-5-1
AC-15	4A 24V 70°C => 2A'>
DC-13	4A 24V 70°C => 2A'>
Solenoid operating voltage
AC/DC	24 V -15% ... +10%
Short circuit protection according to IEC 60269-1
(Fuse)	4A gG 70°C => 2A gG'>
Rated insulation voltage Ui	50 V
Rated impulse withstand voltage Uimp	1,5 kV
Switching voltage
Min. at 10mA	12 V
Switching current
Min. at 24V	1 mA
Power consumption	8 W
Solenoid duty cycle	100 %
LED indicator	Operating voltage corresponds to the solenoid voltage

Reliability values according to EN ISO 13849-1

	Monitoring of guard locking and the safety guard position
B10D	6 x 106

In combination with Actuator BETAETIGER-X-GNQMechanical values and environment

Overtravel

8 mm

In combination with Actuator BETAETIGER-X-GQMechanical values and environment

Overtravel

1 mm