We are not the manufacturer, authorised distributor or authorised representative of the HILGE (brand of GEA) brand in Ireland. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
HILGE (brand of GEA)
Country
Other
Part number
IEC/4/50/7,5 kW400/690/B3132M/3/55/S/X/-/W/-/W/W/S
Description
Neupumpe End suction stainless steel pump, Cr-Ni-Mo steel GEA Hilge MAXA 100-200 CNY 125/100/7.5/4 GHI-274712 Execution: Industrialstandard Wet end parts in Cr-Ni-Mo steel (AISI 300 series) Design: horizontal, single stage pump in long coupled version, with standard motor Installation: on mild steel baseplate Coupling: DKM Painting colour: RAL 5010 Performance: Q = , H = Medium: Impeller(s): closed impeller 1020 @ 230 mm Shaft seal: double mechanical seal Tandem product-side: Silicon carbide / Silicon carbide / EPDM athmosphere-side: hard carbon / stainless steel / EPDM Sealing fluid connection: G1/4" - D10, with Bosch Steckfix-Metall Elastomers: EPDM Connections: Diameter DNE 125 Diameter DNA 100 Connection DNE: Kremo-Flange EN1092-1/01 B1/PN16 (fixed) Connection DNA: Kremo-Flange EN1092-1/01 B1/PN16 (fixed) Position DNE/DNA: axial/radial top, 12:00 o'clock Materials: Casing/casing parts: AISI 300 series Impeller(s): AISI 316L - 1.4404 Shaft: 1.4462 - AISI F51 1.6 μm (product contacted part) Baseplate: mild steel - St 37 Bearing bracket/Lantern: cast iron - GG 20 Motor: three-phase motor with PTC thermistor Size: 132M Vendor: our choice Performance: 7.5 Speed: 1450 rpm Voltage: 400VD/690VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B3 - on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B
Stock availability:
On request