We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand in Ireland. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
UC2000-30GM-IUR2-V15
Part number
104093
Type
Ultrasonic sensor
Description
Ultrasonic sensor UC2000-30GM-IUR2-V15
Stock availability:
On request
Product Description |
---|
Single head system |
General specifications | ||
---|---|---|
Sensing range | 80 ... 2000 mm | |
Adjustment range | 120 ... 2000 mm | |
Dead band | 0 ... 80 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 180 kHz | |
Response delay | 65 ms minimum 195 ms factory setting | |
Indicators/operating means | ||
LED green | solid: Power-on flashing: Standby mode or program function object detected | |
LED yellow 1 | solid: object in evaluation range flashing: program function | |
LED yellow 2 | solid: object in detection range flashing: program function | |
LED red | solid: temperature/program plug not connected flashing: fault or program function object not detected | |
Temperature/TEACH-IN connector | Temperature compensation , Evaluation range programming , output function setting | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
Power consumption | &le, 900 mW | |
Time delay before availability | &le, 500 ms | |
Interface | ||
Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit | |
Input/Output | ||
Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: &ge, 100 µ,s, synchronization interpulse period: &ge, 2 ms | |
Synchronization frequency | ||
Common mode operation | max. 30 Hz | |
Multiplex operation | &le, 30 Hz / n , n = number of sensors , n &le, 5 | |
Output | ||
Output type | 1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V | |
Resolution | evaluation range [mm]/4000, but &ge, 0.35 mm | |
Deviation of the characteristic curve | &le, 0.2 % of full-scale value | |
Repeat accuracy | &le, 0.1 % of full-scale value | |
Load impedance | current output: &le, 500 Ohm voltage output: &ge, 1000 Ohm | |
Temperature influence | &le, 2 % from full-scale value (with temperature compensation) &le, 0.2 %/K (without temperature compensation) | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003 | |
Approvals and certificates | ||
EAC conformity | TR CU 020/2011 | |
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug M12 x 1 , 5-pin | |
Degree of protection | IP65 | |
Material | ||
Housing | stainless steel (1.4305 / AISI 303) PBT plastic parts | |
Transducer | epoxy resin/hollow glass sphere mixture, polyurethane foam | |
Mass | 170 g | |
Factory settings | ||
Output | evaluation limit A1: 200 mm evaluation limit A2: 2000 mm rising ramp |